Hemal Electronics

• Official enclosure from the Raspberry Pi Foundation
• 5 part enclosure
• Raspberry coloured enclosure with White removable lid and sides (GPIO side and HDMI side)
• Product is supplied assembled, shrink-wrapped with 4 rubber feet loose inside

Additional Information:

• Delivery Time: EX STOCK
• Packaging Details: 50 PC BOX

This Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data.

The board itself is tiny, It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short flexible ribbon cable. The camera connects to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.

The sensor itself has a native resolution of 5 megapixels and has a fixed focus lens onboard. No adapters required! This camera will plug directly into the Raspberry Pi 3 Model B camera port!

• Soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
• Tear protective film on the lens
• Bare boards, pay attention to ESD damage, beware of static electricity!

• RPi firmware and raspi-config has been updated to the camera, do an apt-get update; apt-get upgrade;
• Raspi-config, select the camera, start RPi firmware camera driver, and then restart
• Using the command-line program raspivid and raspistill operate a camera to capture video clips or images
• To capture video clips need to play with mplayer
• How will the data through the network camera live broadcast out
• By nc command (ncat – Concatenate and redirect sockets) of the input data of the camera, directly to the output ports of the network redirection.

• This module is only capable of taking pictures and video, not sound.
• This Camera Module is only compatible with Latest Raspberry PI 3 – Model B Original available.
• If you are willing to connect this High-Resolution Camera Module with Raspberry Pi Zero Module, purchase this Raspberry Pi Zero V1.3 Camera Cable and enjoy the camera.

• Fully Compatible with Raspberry Pi 3 Model B.
• Small and lightweight camera module.
• Plug-n-Play camera for Raspberry Pi 3 Model B.