Hemal Electronics

1. Model: SG90
2. Weight: 9 gm
3. Operating voltage: 3.0V~ 7.2V
4. Servo Plug: JR
5. Stall torque @4.8V : 1.2kg-cm
6. Stall torque @6.6V : 1.6kg-cm

t equips Carbon Fiber Gears which makes the servo motor much lighter than the same metal gear motor. For small load applications using the metal gear, servo motor adds on unnecessary weight, so we suggest using these lightweight plastic gear servo motors.

The TowerPro SG90 9g Mini Servo is a 180° rotation servo. It is a Digital Servo Motor that receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.

RED – Positive

Brown – Negative

Orange – Signal

We are selling the wide range of Servo Motors with variable specs and quality material, Check them now

Servo Motors and Accessories

1. High resolution
2. Accurate positioning
3. Fast control response
4. Constant torque throughout the servo travel range
5. Excellent holding power

This is a 5V high torque 4 Phase stepper motor with more than 2000 steps per revolution. It has enough torque to move small robots. The motor can be connected with gear shaft and propeller.

Specifications:-

• High quality stepper motor
  
• Voltage: DC 5V
  
• Diameter: 25mm
  
• Step Angle: 5.625 x 1/64
  
• Reduction Ratio: 1/64
  
• Rated voltage  5VDC
  
• Number of Phase  4
  
• Speed Variation Ratio  1/64
  
• Stride Angle  5.625° /64
  
• Frequency : 100Hz
  
• DC resistance  50Ω±7%(25 )
  
• Idle In-traction Frequency : > 600Hz
  
• Idle Out-traction Frequency : > 1000Hz
  
• In-traction Torque  >34.3mN.m(120Hz)
  
• Self-positioning Torque >34.3mN.m
  
• Friction torque : 600-1200 gf.cm
  
• Pull in torque : 300 gf.cm
  
• Insulated resistance >10MΩ(500V)
  
• Insulated electricity power  600VAC/1mA/1s
  
• Insulation grade  A
  
• Rise in Temperature  <40K(120Hz
  
• Noise  <35dB(120Hz,No load,10cm)
  
• Model  28BYJ-48

The 4WD Four Wheel Drive Kit - A Smart Robot Car with Chassis is the ultimate solution for DIY robotics enthusiasts. If you're passionate about building and programming your robots, this kit is perfect for you. 

This kit includes four pairs of Geared Motors and Wheels, providing the power and mobility your robot needs. The transparent Car Chassis not only gives your robot a modern and sleek look but also offers a platform for creativity.

• Very handy and simple in assembling/disassembling.
• Strong components to withstand extreme terrain conditions.
• Transparent Car Chassis.
• Attractive design.
• Double-layer structure, many mounting holes, enough space
• Easy to install a variety of control panels, sensors
• Educational toys, Ideal for the DIY platform

This Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock- roofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwith and centering. The unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec. 

Wire Configuration of Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation):-

• RED    –   Positive
• Brown – Negative
• Orange – Signal (PWM)

Specifications of Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation) :-

• Operating voltage: 4.8 V - 7.2 V
• Running Current 500 mA – 900 mA (6V)
• Stall Current 2.5 A (6V)
• Temperature range: 0 ºC – 55 ºC
• Control System: Analog
• Operating Angle: 180degree
• Required Pulse: 900us-2100us
• Direction: CCW
• Operating speed: 0.17 s/60º (4.8 V), 0.14 s/60º (6 V)
• Dead band width: 5 μs
• Wire length: 30cm
• Connector: 3 pin 'S' type female header
• Weight: 55 g
• Dimension: 40.7 x 19.7 x 42.9 mm approx.
• Stall torque: 9.8 kgf·cm (4.8 V ), 11 kgf·cm (6 V)
• Stable and shock proof double ball bearing design